Gotcha
Rescue Kit
The
original kit in the range, designed for tradesmen who work at height
The
Gotcha rescue kit is a unique solution to a problem faced by all workers
at height who use PPE for protection against falls. Whereas most rescue
provision has focused on the more extreme activities carried out at
height, the Gotcha kit is designed for tradesmen who use common items of
fall protection. In the event of a fall their situation if suspended is
just as serious as any other worker and a swift recovery is essential.
Suspension trauma does not discriminate against age, fitness, gender, or
race - there are no particular high risk groups.
1/
Suitable for rescue from - Fall
Arrest Lanyards, Fall Arrest Blocks
2/ This is a no-cut kit -
The casualty is raised to release their original attachment
3/ Rescue direction -
You can raise or lower the casualty with this kit
4/ Pre-assembled -
No assembly is required by the user
5/ Remote attachment - The
casualty can be attached from a point of safety
6/ Single person use -
The Gotcha Rescue kit is for raising or lowering a single person
7/ Maximum working length -
The Gotcha kit is available in four lengths -see table
8/ Colour coding -
The kit is colour coded for simplicity |
|
|
Gotcha
Evac Kit
An
evacuation kit that is ideal for use on elevated machinery. MEWPS
1/
Suitable for Evacuation from -
Automated racking systems, overhead cranes and elevated
work platforms
2/ No Cutting Required
3/ Evacuation direction -
The Evac is a descent evacuation kit and requires the evacuee
to descend to a point of safety
4/ Pre-assembled -
No assembly is required by the user
5/ Lone Evacuation -
The kit is designed for a worker to be able to evacuate
themselves in an emergency
6/ One person
use - The
Gotcha Evac is rated for loads up to one person use.
7/ Maximum Working Length -
The Gotcha Evac kit is a 20 metre descent rescue
kit. |
|
|
|
Gotcha
Pole Top Rescue Kit
A kit for rescuing a casualty suspended by work
position and fall arrest equipment when working on a wooden pole.
1/ Suitable for Rescue from -
Fall Arrest Lanyards, Fall Arrest Blocks, Flexible Line Fall Arresters
and Work Position Lanyards.
2/ This is a no-cut kit -
The casualty is raised to release their original attachment, but the kit
does include a safety knife in case of difficulty when raising the
casualty.
3/ Rescue direction -
You can raise or lower the casualty with this kit. This will allow
raising to release or free a snagged casualty and lowering to a point of
safety.
4/ Pre-assembled -
No assembly is required by the user
5/ Assisted Rescue - The
rescuer accesses the casualty in order to recover them.
6/ Single person use -
The Gotcha Pole Top Rescue kit is for raising or lowering a single
person
7/ Maximum working length -
The Gotcha Pole top rescue kit is suitable for use on poles
up to 15 metres high
|
|
Gotcha
SHARK Rescue Kit
A rescue kit that is ideal for those who consider
work at height a key part of their skill such as those who work on
towers and masts
1/ Suitable for Rescue from -
Fall Arrest Lanyards, Vertical Fall Arrest Systems and Webbing Fall
Arrest Blocks
2/ Bladeless cutting
- The casualty is released by cutting their primary attachment with a
unique bladeless cutter for safety and accuracy
3/ Rescue direction
- The SHARK is a descent rescue kit and rescue entails the rescuer
descending to the casualty, collecting them and descending to safety
4/ Pre-assembled -
No assembly is required by the user
5/ Assisted rescue -
The rescuer accesses the casualty in order to recover them.
6/ Two person use -
The Gotcha SHARK is rated for loads up to 300kg in normal use
7/ Maximum Working Length -
Gotcha SHARK kits are available in the following lengths which define
their working length. 30 Metre, 50 Metre, 66 Metre and 100 metre lengths |
|
Gotcha
SHARK TC Rescue Kit
A rescue kit that is ideal for the evacuation or
recovery of a worker from tower cranes
1/ Suitable for Evacuation from -
Tower cranes and other high structures where there is a safe egress at a
lower level
Suitable for Rescue from -
Fall Arrest Lanyards, Vertical Fall Arrest Systems and Webbing Fall
Arrest Blocks
2/ Bladeless cutting
- The casualty is released by cutting their primary attachment with a
unique bladeless cutter for safety and accuracy
3/ Rescue direction
- The SHARK is a descent evacuation and rescue kit. Evacuation is by
lowering one - two persons. Rescue entails the rescuer descending to the
casualty, collecting them and descending to safety
Evacuation -
A casualty or casualties can be evacuated by a rescuer operating the
system from the anchor point. Additionally a rescuer can evacuate a
casualty by descending with them.
4/ Pre-assembled -
No assembly is required by the user
5/ Assisted rescue -
The rescuer accesses the casualty in order to recover them.
6/ Two person use -
The Gotcha SHARK is rated for loads up to 300kg in normal use
7/ Maximum Working Length -
Gotcha SHARK kits are available in the following lengths which define
their working length. 30 Metre, 50 Metre, 66 Metre and 100 metre lengths |
|
Gotcha CRD Rescue Kit
A constant rate descent device suitable for rescue and evacuation
1/ Suitable for Evacuation from - High structures where constant rate lowering and minimal user input are required
Suitable for Rescue from - Vertical situations where you can access the casualty
2/ This is a no cut kit - The casualty is raised to release their original attachment.
3/ Rescue direction - You can lower the casualty to safety and additionally it is possible to raise the casualty for limited distances.
Evacuation direction - The user can descend to safety at a constant rate controlled by the device
4/ Pre-assembled - No assembly is required by the user
5/ Assisted rescue - The rescuer accesses the casualty in order to recover them.
Lone evacuation: A single person can descend to safety
Multiple evacuation: Once the first user has safely descended the system can be used by additional users in quick succession.
6/ Two person use - The Gotcha CRD is rated for loads up to 225kg in normal use
7/ Maximum Working Length - Gotcha CRD kits are available in lengths of up to 100 metres for loads up tp 225kg. For loads up to 150kg it is available in lengths of up to 400
metres |
|
|
|